C.S. Osborne Tufting Needles and Twine
C.S. Osborne Tufting Needle - 12"
The very best. Does not catch when needle is withdrawn. After threading button, end of needle is loaded with clasp. As needle reaches maximum depth, clasp is ejected. Saves time and labor. No need to remove the outside piece of piece being tufted. A splendid tool to the true craft person.
Working Process:
1: At the start, assemble on the thread the corresponding quantity of clasps for the required number of stitches. Insert clasp with thread in the hollow of the needle.
2: Push needle, (with inserted clasps and thread, through upholstery fabric, press head od needle. Clasp and thread will be ejected.
3: Pull needle out and tighten thread, clasp will be anchored inside.
C.S. Osborne # 417
C.S. Osborne Tufting Needle - 18"
The very best. Does not catch when needle is withdrawn. After threading button, end of needle is loaded with clasp. As needle reaches maximum depth, clasp is ejected. Saves time and labor. No need to remove the outside piece of piece being tufted. A splendid tool to the true craft person.
Working Process:
1: At the start, assemble on the thread the corresponding quantity of clasps for the required number of stitches. Insert clasp with thread in the hollow of the needle.
2: Push needle, (with inserted clasps and thread, through upholstery fabric, press head od needle. Clasp and thread will be ejected.
3: Pull needle out and tighten thread, clasp will be anchored inside.
C.S. Osborne # 417L
C.S. Osborne Tufting Clasps
Hign quality clasps used with C.S. Osborne # 417 and #417L Tufting Needles.
Packed and sold in boxes of 500 pieces.
C.S. Osborne # 418
C.S. Osborne Tufting Needle
Nickel plated. Furniture button tufter comes with two dozen clasps.
Osborne quality needle.
Thread twine in round hole of clasp, hook square hole on needle and push then withdraw needle. Directions included.
12" Overall Length. 10 gauge
C.S. Osborne Tufting Clasps
High quality steel. These clasps are used with C,S. Osborne # 613 Tufting Needle.
Packed and sold in bags of 144.
C.S. Osborne Mattress Button Tufter
Nickel Plated. Thread button on cord, cut to length.
Push needle through mattress until cords come through. Pull out needle.
Repeat on all buttons. Then turn over mattress and tie.
C.S. Osborne # 414-12
C.S. Osborne Mattress Button Tufter
Nickel Plated. Thread button on cord, cut to length.
Push needle through mattress until cords come through. Pull out needle.
Repeat on all buttons. Then turn over mattress and tie.
C.S. Osborne # 414-14
C.S. Osborne 11" Loop Needle
Loop needle with a 1/2" slot to hold pre-tied loops.
Also used for hand tuftingwith pretied nylon loops
C.S. Osborne # 615-11
C.S. Osborne 17" Loop Needle
Loop needle with a 1/2" slot to hold pre-tied loops.
Also used for hand tuftingwith pretied nylon loops
Osborne # 615-17
C.S. Osborne "T" Handle Tufting Tool
High quality C.S. Osborne Tufting TooL.
Made of hardened steel with rubber handle. Used for pullong loops through or up.
C.S. Osborne # 408
C.S. Osborne Prong Button Tufter
The C.S. Osborne # 419 Prong Button Tufter accepts any length of prong 22 to 45 sizwee of button. Tool is withdrawn after piercing fabric leaving the prongs extended through the fabric. This keeps the prongs from spreading while being pulled through the padding.
5-1/2" Overall Length
C.S. Osborne Nylon Tufting Twine
Made of superior quality white nylon.
This twine has high tensile strength required for holding buttons in place.
1/2 lb Tube Put-up. 9 Gauge. 350 Yards Per Tube.
C.S. Osbore # 4700-T1/2